Water Ballast Tank Coatings-Epoxy Anticorrosive
With high volume solids and surface tolerance, Interbond 808 is suitable for application as a one or two coat system over grit blasted, hydroblasted or mechanically cleaned surfaces.
| Presentation: | Container |
| Capacity: | 16 l |
| Colours: | |
| Mixing ratio: | 4 Partes Base 1 Parte Catalizador |
| Base: | INTERBOND 808 PART A |
| Catalizador: | KRA855/5LT/EU - INTERBOND 808 PART B |
| Solvent:: | THINNER GTA 220 |
| Cleaner: | THINNER GTA 822 |
| Presentation: | Container |
| Capacity: | 16 l |
| Colours: | |
| Mixing ratio: | 4 Partes Base 1 Parte Catalizador |
| Base: | INTERBOND 808 PART A |
| Catalizador: | KRA855/5LT/EU - INTERBOND 808 PART B |
| Solvent:: | THINNER GTA 220 |
| Cleaner: | THINNER GTA 822 |
A light coloured, tar free, surface tolerant, two pack epoxy coating with high volume solids (82%). Interbond 808 is capable of being applied as a one or two coat system over grit blasted, hydroblasted or mechanically cleaned surfaces. It is also tolerant of damp surfaces (see limitations section).
A high performance epoxy coating for use in water ballast tanks, cofferdams, void spaces, wet spaces, bilges and crude oil tanks. For use at Maintenance & Repair or On Board Maintenance.
| Ref. | Colour | Amount* |
|---|---|---|
| KRA850/20LT/EU | Cream Base | 587,04 € |
| KRA853/20LT/EU | Aluminium | 587,04 € |
Color: Gray
1 X $113.88
